纱线除霉方案 使用iHeir-CM1除霉斑剂进行处理，处理前要把喷壶或喷枪喷出的液体调至雾化状态； Use iHeir-CM1 mildew remover to do the treatment. Before treatment, the liquid ejected by the watering can or spray gun shall be adjusted to atomized state. 均匀喷在整个纱线表面(建议找不起眼的地方小面积测试是否有掉色情况），雾化喷到位即可； Spray it evenly on the whole yarn surface (It is recommended to find an inconspicuous place for a small area test to see if there is discoloration).Remember to spray the atomization on the whole surface. 处理好的纱线静置于通风处晾干即可，如能过烤箱更好，温度不宜超过60℃。 The treated yarn should be dried in a ventilated place. It would be better if it could be dried in the oven, but the temperature should not exceed 60 ℃.