纱线除霉方案 使用iHeir-CM1除霉斑剂进行处理,处理前要把喷壶或喷枪喷出的液体调至雾化状态; Use iHeir-CM1 mildew remover to do the treatment. Before treatment, the liquid ejected by the watering can or spray gun shall be adjusted to atomized state. 均匀喷在整个纱线表面(建议找不起眼的地方小面积测试是否有掉色情况),雾化喷到位即可; Spray it evenly on the whole yarn surface (It is recommended to find an inconspicuous place for a small area test to see if there is discoloration).Remember to spray the atomization on the whole surface. 处理好的纱线静置于通风处晾干即可,如能过烤箱更好,温度不宜超过60℃。 The treated yarn should be dried in a ventilated place. It would be better if it could be dried in the oven, but the temperature should not exceed 60 ℃.